QuantaMesh T3048-LY2
A Powerful Spine/Leaf Switch for Datacenter and Cloud Computing
- MLAG, OSPF, BGP4, ECMP
- OpenFlow Support
- Network Automation
QuantaMesh 3000 Series T3048-LY2
A powerful Top-of-Rack Switch for Cloud Datacenters
The QuantaMesh T3048-LY2 is a high performance and low latency layer 2/3/4 Ethernet switch with 48 1/10Gbe SFP+ and 4 40GbE QSFP+ ports in a compact rack unit size. The 4 40GbE ports provide 160Gbps to the uplink bandwidth up to the core switch. Each 40 Gigabit Ethernet port can be independently configured as 40GbE or 4 x 10GbE for total 64 ports of 10GbE.
Simplicity
The QuantaMesh T3048-LY2 can be managed through an industry standard command-line Interface (CLI) which reduces training and operating costs. A user friendly Web GUI is provided via a standard Web browser for switch management. The QuantaMesh T3048-LY2 also supports Simple Network Management Protocol (SNMP) both from standard MIB and private MIB for easy configuration, monitoring, and management by the network administrator, remotely. The Auto-Installation feature implemented in the QuantaMesh T3048-LY2 helps centralized management to simplify deployment of a truly plug-and-play experience. With the evolution from IPv4 to IPv6, the QuantaMesh T3048-LY2 is a IPv6 integrated management device.
High Availability
The QuantaMesh T3048-LY2 is designed for high availability from both hardware and software perspective. The key features include:
- 1+1 hot-swappable power supplies
- Out-of-band management supported
- 802.1D, 802.1w, and 802.1s supported
- Up to 8 ports per link aggregation group (LACP) and up to 64 groups
- Multi-chassis LAG (MLAG) for preventing the risks of single point failure
- Up to 32 paths ECMP routing for load balancing and redundancy
- Virtual Router Redundancy Protocol supported
High-Performance L2/L3 access deployments
With the compact 1U form factor, high density 48 1G/10G SFP+ and 4 40G QSFP+ ports in the front panel, front to back or back to front airflow design, the QuantaMesh T3048-LY2 is ideal for top-of-rack deployments in high-performance, highly demanding datacenters. The 1.28 terabits per second switching capacity and 960Mpps forwarding rate with low power consumption make the QuantaMesh T3048-LY2 a powerful solution to aggregate high-performance servers in the datacenter.
Advanced IPv4 and IPv6 routing
The QuantaMesh T3048-LY2 is a full layer 2 and layer 3 routing switch that supports advanced IPv4 and IPv6 routing features such as RIP v1/v2, OSPF/ECMP, RIPng and OSPFv3. The multicast routing features for IGMP v1/v2/v3, DVMRP, PIM-DM/SM, MLD v1/v2 and PIM-DM6/SM6 are all supported in the QuantaMesh T3048-LY2.
Datacenter application
The QuantaMesh T3048-LY2 is an IEEE special DCB switch delivering a high-performance solution to integrate server edge access. The key features include:
- Congestion Notification (CN, 802.1Qau)
- Enhanced Transmission Selection (ETS, 802.1Qaz)
- Priority-based Flow Control (PFC, 802.1Qbb)
- Datacenter Bridging Extension (DCBX, 802.1Qaz)
- FCoE Initiation Protocol (FIP) snooping
About QCT
QCT (Quanta Cloud Technology) is a global datacenter solution provider extending the power of hyperscale datacenter design in standard and open SKUs to all datacenter customers. Product lines include servers, storage, network switches, integrated rack systems and cloud solutions, all delivering hyperscale efficiency, scalability, reliability, manageability, serviceability and optimized performance for each workload. QCT offers a full spectrum of datacenter products and services from engineering, integration and optimization to global supply chain support, all under one roof. The parent of QCT is Quanta Computer Inc., a Fortune Global 500 technology engineering and manufacturing company.
Physical Ports
Port configuration
48 1/10GbE SFP+ and 4 40GbE QSFP+ ports
Management Port
Out-of-band management port (RJ-45, 10/100/1000Base-T)
Console Port
1 (RJ-45)
Performance
Switching capacity1.28Tbps
Maximum forwarding rate
952Mpps
Latency
<1.2us
MAC
128K
Layer 2 Features
Switching ModeStore-and-Forward
Spanning Tree
- 802.1D, 802.1w & 802.1s
- Fast Forwarding
- Edge Port
- Loop Guard
- BPDU Filter/Guard
- Auto Edge
- TCN Guard
- Root Guard
- IEEE 802.1Q Tagged Base
- Port-Based
- Private VLAN
- GVRP/GMRP
- 802.1v Protocol VLAN
- Voice VLAN
- MAC-Based VLAN
- IP-Subnet VLAN
- MAC-Based Voice VLAN
- QinQ
Broadcast
Unknown Multicast
DLF (Unknown Unicast)
IGMP Snooping
v1/v2/v3
v1/v2 Querier
Immediate Leave
Link Aggregation
802.3ad with LACP (64 groups)
Static Trunk
Unicast/Multicast Traffic Balance over Trunking Port
LACP Fallback
Link State
Port Backup
Error-Disable Recovery
QoS Features
Scheduling for priority queueWRR, Strict, and Hybrid
COS
802.1p, IP TOS precedence, & DSCP
DiffServ
iSCSI optimization
Auto VoIP
Port rate limit
Security Features
static and dynamic port security (MAC-based)802.1x
Port-based, MAC-based, auto VLAN assignment, guest VLAN, unauthenticated VLAN
Access Control List
L2/L3/L4
IPv6 ACL
L3/L4
RADIUS
Authentication and accounting
TACACS+
Authentication
HTTPS and SSL
AES128-cbc, 3ES-cbc, Blowfish-cbc
SSH 1.5/V2.0
AES128-cbc, 3ES-cbc, Blowfish-cbc
User name and password
Local Authentication, Remote Authentication via RADIUS/TACACS+, AAA
Denial of Service control
Management IP filtering
SNMP/Web/Telnet/SSH
MAC filtering
IP Source Guard
Dynamic ARP inspection (DAI)
DHCP snooping
Web Authentication (Captive Portal)
Layer 3 Features
IP Multinetting/CIDR/31 subnets
Proxy ARP
IRDP
Static route
RIP v1/v2
OSPF
ECMP
BGP4
IGMP v1/v2/v3
DVMRP
PIM-DM/-SM
VRRP
Source IP configuration
Policy-based routing
IPv6 L3 Features
RIPngOSPFv3
MLD v1/v2
PIM-DM6/-SM6
Data Center Features
Enhanced Transmission Selection (802.1Qaz)Priority-based Flow Control (802.1Qbb)
DCBX
FCoE Initiation Protocol (FIP) snooping
Management Features
Industrial command-line interfaceCLI filtering
Web Based Management/HTTPs
Telenet/SSH
Software download/upload
TFTP, Xmodem, FTP, and SCP/SFTP
Configuration download/upload
TFTP, Xmodem, FTP, and SCP/SFTP
Dual Image
SNMP v1/v2c/v3
SNMP inform
v2/v3
RMON 1, 2, 3, & 9
BOOTP
client/relay
DHCP client
DHCP relay
DHCP L2 option 82 Relay
DHCP L3 option 82 Relay
EVENT/Error log
Local Flash
DDNS
DNS client
DNS relay
Remote PING
Traceroute
SNTPv4
LDAP client
LLDP
802.1ab
UDLD
Port mirroring
SPAN
sFlow v5
Cable test
Email alerting
CLI scheduler
Auto Install
IPv6 Management
IPv4/IPv6 Dual Protocol StackICMPv6
ICMPv6 Redirect
IPv6 Path MTU Discovery
IPv6 Neighbor Discovery
Stateless Autoconfiguration
Manual Configuration
DHCPv6
SNMP over IPv6
HTTP over IPv6
SSH over IPv6
IPv6 Telnet Support
IPv6 DNS Resolver
IPv6 RADIUS Support
IPv6 TACACS+ Support
IPv6 Syslog Support
IPv6 SNTP Support
IPv6 TFTP Support
Remote IPv6 Ping
High Availability
Redundant power supply1+1
Mechanical
Dimension (HxWxD)42.8x435x393mm
Weight
7.7kg/16.96lbs (NET)
Environmental Specifications
Operating temperature0~45°C
Operating humidity
90% maximum relative humidity
Electrical
Power requirement100~240VAC, 50/60Hz
Power consumption
240 watts (L2 64B line rate; 10G-SR optics, 100% fan duty)
Safety
UL, cUL, CB, BSMI, CCCEMC
CE, FCC, VCCI, MSIP, BSMI, CCCRoHS
Reduction of Hazardous Substances (RoHS) 6Supported Optics and Cables
DAC cable (SFP+): 0.5m, 1m, 1.5m, 2m, 2.5m, 3m, and 5mAOC cable (SFP+, 850nm, MMF): 1m, 3m, 7m, 10m, 20m, and 100m
DAC cable (QSFP+): 1m, 3m, and 5m
DAC cable (QSFP+, fan-out): 1m, 3m, and 5m
AOC cable (QSFP+, 850nm, MMF): 7m, 10m, and 20m
10G optic (SFP+, LC, 850nm, MMF): 10GBASE-SR optic
10G optic (SFP+, LC, 1310nm, SMF): 10GBASE-LR optic
40G optic (QSFP+, MPO, 850nm, MMF): 10GBASE-SR4
40G optic (QSFP+, LC, 1310nm, SMF): 10GBASE-LR4
Title | Version | Date | Size | |
---|---|---|---|---|
QuantaMesh T3048-LY2 | v2 | 2015/03/27 | 706KB |
Title | Version | Date | Size | |
---|---|---|---|---|
Safety Information_EN for UL | 2014/06/18 | 295KB | ||
Safety Information_French for CUL. | 2014/06/18 | 404KB | ||
Safety Information_Russian_Language v1 | 2014/06/18 | 556KB | ||
Safety Information_Simplify Chinese for CCC. | 2014/06/18 | 756KB | ||
Safety Information_Tranditional Chinese for BSMI. | 2014/06/18 | 619KB |
Title | Version | Date | Size | |
---|---|---|---|---|
QuantaMesh Switch User Guide | 2014/10/31 | 13.36MB | ||
QuantaMesh T3048-LY2 Installation Guide | 2014/06/18 | 4.1MB |
Title | Version | Date | Size | |
---|---|---|---|---|
LY2 v1.4.17.00 image | 1.4.17.00 | 2015/03/10 | 19.64MB |